Discover jobs
Job Search
drywall installer
Posted on November 18, 2024 by Employer details Onex Construction
Job details
Education: Secondary (high) school graduation certificate. Work site environment: At heights. Dusty. Noisy. Tasks: Read blueprints, drawings and specifications to determine work requirements . Apply successive coats of compound and sand seams and joints. Apply, level and smooth coats of plaster. Clean and prepare surfaces. Cure freshly plastered surfaces. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Mould and install ornamental plaster panels, cornices and trim. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath. Install corner beads and wire mesh around beams to which plaster is to be applied. Install exterior and interior steel studs. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Prepare wall and ceiling layouts. Estimate costs and materials. Supervision: 3-4 people. Experience: 1 to less than 7 months.- LocationCambridge, ON
- Workplace information On site
- Salary$35.10HOUR hourly / 35 to 40 hours per week
- Terms of employment Permanent employmentFull time
- Day, Weekend, Morning
- Starts as soon as possible
- vacancies 1 vacancy
- Source Job Bank #3155855
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
1 to less than 7 months
On site
Work must be completed at the physical location. There is no option to work remotely.
Work site environment
- At heights
- Dusty
- Noisy
Responsibilities
Tasks
- Read blueprints, drawings and specifications to determine work requirements
- Apply successive coats of compound and sand seams and joints
- Apply, level and smooth coats of plaster
- Clean and prepare surfaces
- Cure freshly plastered surfaces
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Mould and install ornamental plaster panels, cornices and trim
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Install exterior and interior steel studs
- Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
- Prepare wall and ceiling layouts
- Estimate costs and materials
Supervision
- 3-4 people
Who can apply to this job?
The employer accepts applications from:
- Canadian citizens and permanent or temporary residents of Canada.
- Other candidates with or without a valid Canadian work permit.
Advertised until
2024-12-16
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: