Discover jobs
Job Search
taper, drywall
Posted on November 11, 2024 by Employer details Welcome Drywall & Construction Ltd
Job details
Education: Secondary (high) school graduation certificate. Work site environment: At heights. Dusty. Noisy. Work setting: Relocation costs covered by employer. Willing to relocate. Tasks: Apply successive coats of compound and sand seams and joints. Clean and prepare surfaces. Cut and install metal corner beads to protect exterior corners. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Mix plaster ingredients to desired consistency. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Attach metal or gypsum lath to studs or furring. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install corner beads and wire mesh around beams to which plaster is to be applied. Erect and install scaffolding, falsework and other working platforms. Security and safety: Criminal record check. Work conditions and physical capabilities: Bending, crouching, kneeling. Hand-eye co-ordination. Manual dexterity. Overtime required. Physically demanding. Repetitive tasks. Standing for extended periods. Work under pressure. Weight handling: Up to 23 kg (50 lbs). Personal suitability: Flexibility. Reliability. Team player. Experience: Experience an asset.- LocationCalgary, AB
- Workplace information On site
- Salary$29.50HOUR hourly / 30 to 40 hours per week
- Terms of employment Permanent employmentFull time
- Day, Weekend, Morning
- Starts as soon as possible
- vacancies 3 vacancies
- Source Job Bank #3149458
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
Experience an asset
On site
Work must be completed at the physical location. There is no option to work remotely.
Work site environment
- At heights
- Dusty
- Noisy
Work setting
- Relocation costs covered by employer
- Willing to relocate
Responsibilities
Tasks
- Apply successive coats of compound and sand seams and joints
- Clean and prepare surfaces
- Cut and install metal corner beads to protect exterior corners
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Mix plaster ingredients to desired consistency
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Attach metal or gypsum lath to studs or furring
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Erect and install scaffolding, falsework and other working platforms
Additional information
Security and safety
- Criminal record check
Work conditions and physical capabilities
- Bending, crouching, kneeling
- Hand-eye co-ordination
- Manual dexterity
- Overtime required
- Physically demanding
- Repetitive tasks
- Standing for extended periods
- Work under pressure
Weight handling
- Up to 23 kg (50 lbs)
Personal suitability
- Flexibility
- Reliability
- Team player
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-12-11
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: