Discover jobs
Job Search
drywall finisher
Posted on November 08, 2024 by Employer details Blue Hills Construction Corporation
Job details
Education: No degree, certificate or diploma. Tasks: Apply successive coats of compound and sand seams and joints. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Measure, cut, fit and install drywall sheets. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath. Install corner beads and wire mesh around beams to which plaster is to be applied. Prepare wall and ceiling layouts. Work conditions and physical capabilities: Attention to detail. Ability to work independently. Weight handling: Up to 23 kg (50 lbs). Personal suitability: Team player. Punctuality. Experience: 3 years to less than 5 years. Health benefits: Health care plan. Other benefits: Other benefits.- LocationMaple Creek, SK
- Workplace information On site
- Salary$27.00HOUR hourly / 32 hours per week
- Terms of employment Permanent employmentFull time
- Starts as soon as possible
- Benefits: Health benefits, Other benefits
- vacancies 3 vacancies
- Source Job Bank #3147924
Overview
Languages
English
Education
- No degree, certificate or diploma
Experience
3 years to less than 5 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Responsibilities
Tasks
- Apply successive coats of compound and sand seams and joints
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Measure, cut, fit and install drywall sheets
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Prepare wall and ceiling layouts
Additional information
Work conditions and physical capabilities
- Attention to detail
- Ability to work independently
Weight handling
- Up to 23 kg (50 lbs)
Personal suitability
- Team player
- Punctuality
Benefits
Health benefits
- Health care plan
Other benefits
- Other benefits
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-12-08
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: