Discover jobs
Job Search
drywall installer and finisher
Posted on September 28, 2024 by Employer details Mag Drywall 2008 Ltd
Job details
Education: Secondary (high) school graduation certificate. Work setting: Various locations. Tasks: Apply successive coats of compound and sand seams and joints. Clean and prepare surfaces. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Install corner beads and wire mesh around beams to which plaster is to be applied. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Work conditions and physical capabilities: Physically demanding. Standing for extended periods. Weight handling: Up to 13.5 kg (30 lbs). Experience: 3 years to less than 5 years.- Location#12, 3620 29 Street NECalgary, ABT1Y 5Z8
- Workplace information On site
- Salary$27.00HOUR hourly / 40 hours per week
- Terms of employment Permanent employmentFull time
- Day, Evening
- Starts as soon as possible
- vacancies 10 vacancies
- Source Job Bank #3098961
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
3 years to less than 5 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Work setting
- Various locations
Responsibilities
Tasks
- Apply successive coats of compound and sand seams and joints
- Clean and prepare surfaces
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
Additional information
Work conditions and physical capabilities
- Physically demanding
- Standing for extended periods
Weight handling
- Up to 13.5 kg (30 lbs)
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-11-27
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: