Discover jobs
Job Search
drywall installer
Posted on July 16, 2024 by Employer details V.Dias Inc
Job details
Education: No degree, certificate or diploma. Work site environment: Dusty. Work setting: Residential. Urban area. Tasks: Instruct apprentices. Apply successive coats of compound and sand seams and joints. Apply, level and smooth coats of plaster. Clean and prepare surfaces. Cure freshly plastered surfaces. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Mould and install ornamental plaster panels, cornices and trim. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Spray acoustic or texture materials over walls and ceilings. Tape over joints using taping machine and embed tape in compound. Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces. Attach metal or gypsum lath to studs or furring. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath. Install corner beads and wire mesh around beams to which plaster is to be applied. Install exterior and interior steel studs. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Install vapour barriers and thermal and sound insulation. Prepare wall and ceiling layouts. Work conditions and physical capabilities: Handling heavy loads. Large workload. Physically demanding. Repetitive tasks. Standing for extended periods. Weight handling: Up to 23 kg (50 lbs). Own tools/equipment: Hard hat. Mask. Safety glasses/goggles. Steel-toed safety boots. Tools. Screening questions: Are you available for the advertised start date?. Are you currently legally able to work in Canada?. Do you have previous experience in this field of employment?. Experience: 2 years to less than 3 years.- Location103 Bude StYork, ONM6E 2E4
- Workplace information On site
- Salary$36.00 to $39.00HOUR hourly (To be negotiated) / 40 hours per week
- Terms of employment Permanent employmentFull time
- Day
- Starts as soon as possible
- vacancies 1 vacancy
- Source Job Bank #3001468
This employer has applied for a Labour Market Impact Assessment (LMIA) to hire a foreign worker to fill labour or skills shortages on a temporary basis. Canadians and Permanent residents are able and encouraged to apply. Learn more.
Overview
Languages
English
Education
- No degree, certificate or diploma
Experience
2 years to less than 3 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Work site environment
- Dusty
Work setting
- Residential
- Urban area
Responsibilities
Tasks
- Instruct apprentices
- Apply successive coats of compound and sand seams and joints
- Apply, level and smooth coats of plaster
- Clean and prepare surfaces
- Cure freshly plastered surfaces
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Mould and install ornamental plaster panels, cornices and trim
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Spray acoustic or texture materials over walls and ceilings
- Tape over joints using taping machine and embed tape in compound
- Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
- Attach metal or gypsum lath to studs or furring
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Install exterior and interior steel studs
- Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
- Install vapour barriers and thermal and sound insulation
- Prepare wall and ceiling layouts
Additional information
Work conditions and physical capabilities
- Handling heavy loads
- Large workload
- Physically demanding
- Repetitive tasks
- Standing for extended periods
Weight handling
- Up to 23 kg (50 lbs)
Own tools/equipment
- Hard hat
- Mask
- Safety glasses/goggles
- Steel-toed safety boots
- Tools
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-11-13
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: